Sink Bowls

• Specify LH / RH (Imagine longest length from left to right at back)
• If no standpipe used, Oxford Hardware can cut overflow hole (no charge but extra day)
• THE WHOLE RANGE EX-STOCK

Flange sizes

The waste fitting is seated in a flange in the base of the bowl. UK flanges can be 70 or 80mm diameter. European flanges are 70mm diameter.

All Oxford Hardware bowls (except Pot Wash) have the European flange.

The EURO wastes fit UK and European flanges. VTE/VTI only to fit European flanges.

Waste hole sizes

The standard waste hole is 54mm diameter. Waste disposal units and basket strainer waste holes are 89mm diameter.

Oxford Hardware can cut or enlarge waste holes and cut overflow holes.

Waste and Overflow Position

Please specify waste position and overflow position when ordering. Left and Right hand waste is determined when the long side is towards you. The waste is then either left back or right back. If you wish to fix the sinks with the short side towards you, the handing must be established from the long side.

Longside Right Hand Waste Left Hand Waste

For this configuration, customers will need to order a right hand waste i.e. right hand relation to the long side.

** Central waste available for waste disposal

*** Corner basket waste available

NOTE: All dimensions are internal. Round bowls available with / without overflow. Blank bowls available.